Skip to content
Back to Blog
Ratgeber·5 min min read

LED Wall for Next Year: What to Settle by January

If you plan an LED wall for 2027, settle location, area, approvals and cost factors by January. That turns a budget line into a reliable quote.

s
smartenic Redaktion
LED Wall for Next Year: What to Settle by January

In November and December, many companies set their budgets for the coming year. If you are planning an LED wall, you often face the same problem: the basis for a reliable figure is missing, and a rough estimate is not enough for management.

This article shows what to settle by January so that a budget line becomes a concrete quote. It applies to LED walls in foyers, shops, showrooms or meeting rooms, in Vienna and across Austria as well as in Slovakia.

Why plan an LED wall for 2027 now?

An LED wall for 2027 should be planned now, because budget approval, the building check and delivery happen one after another. If you only start planning in spring, installation often slips into the second half of the year. With the basics settled by January, the quote is ready when the budget is approved.

A typical LED project sequence:

  1. Define the need: what is the wall for, where will it hang, who looks at it from what distance?
  2. Site visit: check the area, wall, power supply and access.
  3. Quote: pixel pitch, size, substructure, installation, software.
  4. Approvals: budget, landlord, structural check, fire safety where needed.
  5. Order and delivery: get the delivery date confirmed in writing.
  6. Installation and commissioning: agree the date with building management.

More on technology and set-up is on the LED wall page.

What needs to be settled by January?

By January, location, usable area, viewing distance, purpose of the content and internal responsibility should be fixed. These five points determine the pixel pitch, the size and therefore most of the cost. Without them, no supplier can prepare a quote that is comparable with others.

The five points in detail:

  • Location: which wall, indoor or outdoor, lighting by day and in the evening.
  • Area: the width and height actually available, including clearance to ceiling, floor and doors.
  • Viewing distance: the distance from which most people look at the wall. It determines the right pixel pitch.
  • Purpose: brand presence, information, presentation or advertising. This affects format and software.
  • Responsibility: who decides in the company and who will maintain content later.

You can run through an initial size plan with the LED wall configurator.

Planning example: an office building foyer in Vienna

This is an example, not a customer project. A property manager wants to install an LED wall behind the reception desk in 2027. By January, they decide which wall is suitable, measure the free area and note that visitors mainly see the wall from the entrance and the waiting area. Content will cover tenant information, events and welcome messages, maintained by the reception team. With this information they request two variants, a smaller and a larger wall. The structural check and the power supply are reviewed in parallel. In February a quote is ready for budget approval, and installation is planned for the summer months when the building is quieter.

How do you budget for an LED wall without a price list?

You budget for an LED wall through cost factors rather than a price per square metre found online. Area and pixel pitch determine the hardware. On top come substructure, installation, power, control, software and service. If you request these items separately, you can compare quotes and see where there is room to adjust.

The main cost factors:

  • Area: the larger the wall, the more modules.
  • Pixel pitch: a finer pitch means more LEDs per area and higher cost.
  • Indoor or outdoor: outdoor walls need more brightness and weather protection.
  • Substructure: wall-mounted, freestanding or suspended.
  • Installation: access, working height, work outside opening hours.
  • Control and software: player, controller, content management.
  • Service: spare modules, maintenance, contact person.

How these factors interact is explained on the page What does digital signage cost?. For the budget, it helps to request a range with two variants, for example two sizes or two pixel pitches.

Who needs to approve it in the company and in the building?

An LED wall usually needs more approvals than a single screen: management and budget owners, the landlord or building management, a structural engineer for the mounting, an electrician for the connection and often IT for network and security. Get these approvals before ordering.

A checklist for internal alignment:

  • Management: budget and goal of the wall.
  • Landlord or building management: consent to installation, requirements for the wall.
  • Structure: load-bearing capacity of wall or ceiling.
  • Electrical: dedicated circuit, protection, location of connections.
  • IT: network access, remote maintenance, security policies.
  • Fire safety: clarify with the relevant authority for escape routes and foyers.

Examples for office buildings and foyers are on the real estate page.

Which questions should the quote answer?

A good quote for an LED wall explains which pixel pitch was chosen for which viewing distance, the exact size of the wall, what installation and substructure include, which software is part of it, how service is arranged and when delivery will happen. If any of these is missing, ask before comparing quotes.

Questions to ask:

  1. Why this pixel pitch for our room?
  2. What resolution and aspect ratio does the area give?
  3. What is included in installation, and what is not?
  4. How is content uploaded, and by whom?
  5. Which spare parts are supplied?
  6. Which warranty terms apply, in writing in the quote?
  7. Which delivery date is binding?

When is the right time for installation?

The right time for installation is a period of low activity in the building: refurbishments, the summer break, weekends or the time before an opening. Set the target date during budget planning and work back from it for approvals and delivery. That way you avoid installing during peak operation.

Ask yourself:

  • Dates in the building: is there an opening, trade fair or company event the wall should be running for?
  • Operations: can the area be closed off for installation?
  • Content: is finished content ready for commissioning? Cloud management from smartenic is coming soon: smartenic Control.

Plan time for commissioning after installation. This includes adjusting brightness and colour, a test with real content and a short training session for the people who will maintain content later. If you put this step on opening day, you have no reserve for corrections. A few days of buffer between installation and first use are therefore part of a realistic schedule.

For projects in Vienna with a site visit and installation, see the LED wall Vienna page.

Next step

By January, collect photos of the wall, the dimensions of the area, the approximate viewing distance and the preferred installation period. With this information we prepare a quote with separate items. Write to us via the contact form.

Frequently asked questions

A rough figure per square metre is risky for a budget, because pixel pitch, indoor or outdoor use, substructure and installation change the cost considerably. A quote with two variants based on your area and viewing distance is better. That way the budget contains a figure that fits the wall.

The right pixel pitch depends on viewing distance: the closer people stand to the wall, the finer it needs to be. Measure the distance from which most people look at the wall and include it in your enquiry. The supplier should justify the recommendation in the quote.

For an indoor wall you usually need consent from building management or the landlord and a structural check. In escape routes and where fire safety rules apply, further bodies are involved. Clarify this before ordering so installation does not fail because of a missing approval.

LED walls are made of modules, so later expansion is technically possible. In practice, modules should come from the same production batch so colour and brightness look uniform. If you plan an expansion, say so in your enquiry so the substructure and spare modules are designed for it.

Decide before ordering who in the company creates and schedules content, for example marketing or reception. With a cloud CMS, content can be planned from the office without being on site. Without this responsibility, the wall often shows the same content for months.

An LED wall has no visible seams and can be built in almost any size. A video wall made of individual displays has narrow bezels between the screens. Which fits depends on area, viewing distance and content. Ask for both variants to be compared in the quote.
s
Written by
smartenic Redaktion
Share:

Interested in our solutions?

Explore our products and case studies or get in touch to discuss your project.